Initialize/Delete Data - Fuji Xerox DocuCentre 1085 User Manual

Buffer Size
Specify the received buffer (where data sent from computers is temporarily stored)
memory capacity for each interface. With LPD, SMB, and IPP, specify whether or not
to spool to memory, the spool destination, and the memory capacity for each.
• Parallel, NetWare Memory, IPP Memory, EtherTalk, USB Memory, Port9100
Memory - Specify the received buffer memory capacity within the range of 64 to
1024 KB in 32 KB increments.
• LPD Spool, SMB Spool
Off - Select this if you do not want to perform spool processing. When the LPD or
SMB data from a computer is being processed, data from another computer cannot
be received via the same interface. Specify buffer memory capacity within 64 to
1024 KB in 32 KB increments.
Memory - Select this to perform spool processing. This uses the memory as the
receive buffer for spool processing. If you select this option, specify the receive
buffer memory capacity for spool processing within 0.5 to 32 MB in 0.25 MB
increments.

Initialize/Delete Data

Use this feature to initialize the default values or print meter recorded in the NV
memory, or delete the data such as the form registered in the machine.
1.
Select the required option by selecting
[ ] or [ ] using the <Select> button.
2.
Press the <Enter> button.
3.
Perform the necessary operations.
4.
Press the <Enter> button. The selected option is indicated by an asterisk(*).
NVM
Initialize the NV memory. The NV memory is a non-volatile memory that allows the
settings of the machine to be retained even when power is off. When initializing the NV
memory, the specified value for each item resets to the factory default values, clearing
all user settings. Press the <Enter> button to initialize.
Print Meter
Initialize the data for the print meter reports. When initializing the data of print meter,
the value of the meter resets to 0. Press the <Enter> button to initialize.
Print Settings
151