Fuji Xerox DocuCentre 1085 User Manual page 119

Feature name
Emulation Settings PostScript
This page allows you to configure the settings when
PostScript is enabled.
Logical Printer Number – This is a display-only item. It
displays the logical printer number that is being changed.
Click on the [Edit] button to configure.
• Paper Tray: Allows you to select the paper tray.
• Output Size: Allows you to select the paper size.
• Output Destination: Allows you to select the destination
for your output.
• Print Quantity Setup: Allows you to select the print
quantity setup that has priority over other settings.
• Quantity: Enter the number of sets to print when logical
printer settings is selected for print quantity setup.
• 2 Sided Print: Allows you to select double-sided printing.
• Collated: Allows you to specify whether to enable/disable
the Collated feature.
• Offset Stacking: Allows you to select the offset method.
• Image Enhancement: Allows you to specify whether to
enable/disable image enhancement.
PCL
This page allows you to configure the settings when PCL is
enabled.
Paper Tray – Allows you to select the paper tray.
Output Size – Allows you to select the paper size.
Paper Size (Bypass) – Allows you to select the paper size for
Tray 5 (bypass tray).
Quantity – Allows you to specify the number of sets to print
within the range of 1–999.
2 Sided Print – Allows you to select double-sided printing.
Image Orientation – Allows you to select the image
orientation.
Form Lines – Allows you to specify the page length (printing
area) of one page.
Font – Allows you to select the required font from the list of
fonts available.
Font Size – Allows you to specify the font size within the
range of 4.00–50.00 points in 0.25 point increments.
Font Pitch – Allows you to specify the font pitch within the
range of 6.00–24.00 points in 0.01 point increments.
Symbol Set – Allows you to select the required symbol set
from the list of symbol sets available.
Handle CR As – Allows you to enable/disable CR+LF for the
PCL mode.
Handle LF and FF As – Allows you to enable/disable CR+LF
and CR+FF for the PCL mode.
HexDump – Allows you to enable/disable hexadecimal dump
for the PCL mode.
Image Enhancement – Allows you to enable/disable image
enhancement.
Setting items
Properties
119