Fuji Xerox DocuCentre 1085 User Manual page 204

11 Problem Solving
016-501
016-502
016-503
016-504
016-505
016-701
016-702
016-709
016-719
016-720
016-721
016-726
016-730
016-732
016-744
016-749
016-751
204
Code
POP3 server name is not set correctly when using POP3 protocol.
Check if the POP3 server is set correctly.
Failed to login to POP3 server when using POP3 protocol. Check if the
user name and password used for the POP3 server are set correctly.
SMTP server name is not set correctly when e-mail was transmitted.
Check if the SMTP server is set correctly. Also, check that the DNS
server is set correctly.
POP3 server name is not set correctly when e-mail was transmitted.
Check if the POP3 server is set correctly. Also, check that the DNS
server is set correctly.
Failed to login to POP3 server when transmitting e-mail. Check if the
user name and password used for the POP3 server are set correctly.
PCL print data could not be processed as there was insufficient memory.
Lower the resolution, or print without setting double-sided or Multiple Up
printing.
PDL print data other than PostScript could not be processed as there
was insufficient space in the PDL print page buffer other than PostScript.
Take one of the following actions.
• Lower the resolution the printer driver.
• Increase the size of the print page buffer.
• Add on memory.
An error occurred while processing PCL print data. Print again.
There is insufficient memory used for PCL. Increase the memory.
A PCL command error occurred. Check the print settings, or correct the
PCL command.
An error occurred while printing job. Instruct the machine to print again.
If an error cannot be resolved, contact the Customer Support Center.
The print language could not be selected. Select print language.
A command that is not supported is detected. Check the print data,
delete the command that caused an error, and print again.
The form specified in the emulation setting is not registered in the host
computer. Resend the form data.
The machine could not print the PDF file because it contains features
not supported in the machine. Open the file in Adobe Reader and select
[Print] from the [File] menu to print it.
A PJL command syntax error occurred. Check the print settings, or
correct the PJL command.
The machine could not print the PDF file using ContentsBridge Utility.
Open the file in Adobe Reader and select [Print] from the [File] menu to
print it.
Description and Corrective Action