Reduce/Enlarge; Send Header - Fuji Xerox DocuCentre 1085 User Manual

4 Fax

Reduce/Enlarge

This feature allows you to enlarge or reduce a scanned document to a specified ratio
to transmit.
NOTE: The document will be enlarged or reduced by the enlargement ratio specified
here, regardless of the document size. Even if documents of different sizes are set,
they will all be transmitted with the same enlargement ratio.
NOTE: When the enlargement ratio is set to a value other than 100%, [Rotate 90°]
under [Fax Send Settings] is disabled.
1.
Press the < > or < > button to display
[Reduce/Enlarge] on the Fax screen.
2.
Select [Reduce/Enlarge] using the
<Select> button.
3.
Select the required option.
4.
Press the <Enter> button.
100%
Scans and sends the document the same size as the original document.
Presets
Allows you to select from the preset reduction/enlargement ratios.

Send Header

Use this feature to add the sender name, the start time, the date of transmission, and
the number of pages to the top of each page of the document. You can select from two
registered sender names, which are set up by the System Administrator. For more
information, refer to Send Header in the Setups on page 154.
NOTE: If you use a send header, you can add the name of the destination registered
in Speed Dial.
1.
Press the < > or < > button to display
[Send Header] on the Fax screen.
2.
Select [Send Header] using the
<Select> button.
3.
Select the required option.
4.
Press the <Enter> button.
Off
Disables the feature.
Sender Name 1
Uses the send header registered to Sender Name 1.
74