Select The Features; Enter The Quantity - Fuji Xerox DocuCentre 1085 User Manual

3 Copy

2. Select the Features

Various copy features can be selected for your copy job.
NOTE: If the machine remains idle for a set time (determined by the System
Administrator), the settings will be reset. For more information, refer to Auto Clear in
the Setups chapter on page 134.
1.
Press the <Copy> button on the
control panel. Ensure that the
Copy screen is displayed.
2.
Press the <Clear All> button
once on the control panel to
cancel any previous selections.
3.
Select an option for the
required feature.
If necessary press the < > or < > button to switch between screens, and configure
the copy settings. For more information about Copy features available, refer to Copying
Features on page 54.

3. Enter the Quantity

The maximum copy quantity is 99.
1.
Use the numeric keypad on the control
panel to enter the number of copies
required. The number entered is
displayed in the upper right-hand corner
of the screen.
NOTE: To cancel an incorrect entry, press the <C> button and enter the correct
quantity.
52
<Copy> button
<Clear All> button
<C> button