Machine Status - Fuji Xerox DocuCentre 1085 User Manual

Machine Status

Use this button to display information about the machine. This button allows you to view
the billing meter, print lists/reports, check the paper supply, and review the status of
faults.
1.
Press the <Machine Status> button on
the control panel.
Press the <Machine Status> button at
any time to exit.
The following icons show the status of print job or consumables.
– Shows the print job in progress.
NOTE: The [Report/List (Print Jobs)] screen and the [Print Settings] screen cannot be
displayed while this icon is displayed.
– Shows the error in the print jobs.
– Shows the toner cartridge needs to be replaced soon.
– Shows the drum cartridge needs to be replaced soon.
For more information, refer to the following.
Error Information – page 41
Consumables – page 42
Report/List (Non-print Jobs) – page 42
Report/List (Print Jobs) – page 43
Billing Meter – page 45
Print Mode – page 45
Error Information
This screen allows you to view the date and time of the errors, the error codes and the
status of each error.
The contents of each screen may differ depending on the type or status of the job.
NOTE: If [Details] is selected to display detailed information on an error, and the error
is then cancelled, the error information may stay on the display even after the error
itself has been cancelled. To erase the error display, press the <Machine Status>
button and then exit.
1.
Select [Error Information] on the
[Machine Status] screen using the
<Select> button.
2.
Press the <Enter> button.
3.
Press the < > or < > button to switch between screens.
Modes
41