Cdp Source-Interface; Cdp Log Mismatch Duplex - Cisco Small Business 300 1.1 Series Administration Manual

CDP Commands
78-20269-01 Command Line Interface Reference Guide
Example
Turn off mandatory TLV validation:
console(conf) no cdp mandatory-tlvs validation
45.7

cdp source-interface

The cdp source-interface Global Configuration mode command specifies the CDP
source port used for source IP address selection. The no format of this command
deletes the source interface.
Syntax
cdp source-interface
no cdp source-interface
Parameters
interface-id—Source port used for Source IP address selection.
Default Configuration
No CDP source interface is specified.
Command Mode
Global Configuration mode
User Guidelines
Use the cdp source-interface command to specify an interface whose minimal IP
address will be advertised in the TVL instead of the minimal IP address of the
outgoing interface.
Example
console(conf) cdp source-interface gi1
45.8

cdp log mismatch duplex

Use the cdp log mismatch duplex Global and Interface Configuration mode
command to enable validating that the duplex status of a port received in a CDP
interface-id
45
686