Dot1X Reauthentication; Dot1X Timeout Reauth-Period - Cisco Small Business 300 1.1 Series Administration Manual

802. 1 x Commands
78-20269-01 Command Line Interface Reference Guide
20.4

dot1x reauthentication

Use the dot1x reauthentication Interface Configuration mode command to enable
periodic re-authentication of the client. Use the no form of this command to return
to the default setting.
Syntax
dot1x reauthentication
no dot1x reauthentication
Parameters
N/A
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface configuration (Ethernet)
Example
console(config)# interface gi1
console(config-if)# dot1x reauthentication
20.5

dot1x timeout reauth-period

Use the dot1x timeout reauth-period Interface Configuration mode command to
set the number of seconds between re-authentication attempts. Use the no form
of this command to return to the default setting.
Syntax
dot1x timeout reauth-period
no dot1x timeout reauth-period
Parameters
seconds
reauth-period
(Range: 300-4294967295)
seconds
—Number of seconds between re-authentication attempts.
20
252