Rmon Event - Cisco MDS 9000 series Command Reference Manual

Chapter 20 R Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

rmon event

To configure a remote monitoring (RMON) event, use the rmon event command in configuration mode.
To delete an RMON event, use the no form of the command.
Syntax Description event-number
description text
owner owner-name
log
trap community-string
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
The events created by this command can be triggered by alarms configured using the rmon alarm
command.
Examples The following example configures an RMON event.
switch# config terminal
switch(config)# rmon event 2 log trap eventtrap description CriticalErrors owner Test2
Related Commands Command
rmon alarm
show rmon
OL-8413-07, Cisco MDS SAN-OS Release 3.x
rmon event event-number [description text [owner owner-name] | log [trap trap-name]
[description text] [owner owner-name] | owner owner-name | trap community-string
[description text] [owner owner-name]]
no rmon event event-number
Specifies the RMON event number. The range is 1 to 65535.
Specifies a description of the event. Maximum length is 80 characters.
Specifies an owner for the alarm. Maximum length is 80 characters
Generates an RMON log entry when the event is triggered by an alarm.
Generates an SNMP notification when event is triggered by an alarm.
Maximum length is 32 characters.
Modification
This command was introduced.
Description
Configures an RMON alarm.
Displays RMON configuration information.
Cisco MDS 9000 Family Command Reference
rmon event
20-27