Inserting A New Print Media Roll; Automatic Roll Switching - Oce 9300 User Manual

Inserting a new print media roll

Before using the copier for the first time, you must specify the order in which
the paper formats appear on the scanner operating panel. You can do this by
choosing between ISO, ANSI or ARCHITECT paper format on the printer
operating panel.
Setting the media format
Press 'Program' to enter the main menu.
1
Select the '
2
Press 'next/select' to enter the '
3
Select '
4
Press 'next/select' to enter the '
5
Select '
6
Press 'next/select' to enter the '
7
Select the required format using the
8
Press 'next/select' to confirm the selected format.
9
Press 'Program' to exit the main menu.
10
If the message 'ROLL EMPTY' appears in the display, you must load a new
roll of print media. Depending on your configuration, you can reload roll 1
and/or roll 2.
After reloading, the plot is reprinted automatically.
Note:

Automatic roll switching

If a roll becomes empty, the printer reports a roll empty error. When this
happens, printing also stops. The printer clears the paper path and generates a
message to indicate that the printer is ready to accept a new print command. If
the correct material type and format is on the other roll, the printer will use that
roll and will resume printing automatically.
If there is no match of material type and format, you must refill the empty roll.
26 Océ 9300 User Manual
CONFIGURATION
' using the
PLOT MANAGER
' using the
MEDIA FORMAT
' item using the
CONFIGURATION
or button.
PLOT MANAGER
or button.
MEDIA FORMAT
or button.
or button.
' menu.
' menu.
' menu.