Preparing The Tool For The Positioning Of The Mirror - Oce 3121 Technical & Service Manual

4 Preparing the tool for the positioning of the mirror

Before using the positioning tool, the arrangement of the pins needs to be set.
The figures show the positions (1), (2) and (3) for the pins and A, B, and C.
(the pins arranged for the front of the machine)
The arrangement of the pins for the front and the rear of the machine.
1
The pin A of the positioning tool is not used.
Note:
ed.1
Insert the longest
pin in (1)
Insert the shortest
pin in (3)
04 Exposure 405