Dell Networking 2024 Reference Manual page 1041

Hide thumbs Also See for Networking 2024:
Table of Contents

Advertisement

Example
console(config)#ip helper enable
show ip helper-address
Use the show ip helper-address command to display the IP helper address
configuration.
Syntax
show ip helper-address [
interface — Optionally specify an interface to limit the output to the
configuration of a single interface. The interface is identified as vlan vlan-
id.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
Field
Interface
UDP Port
Discard
Hit Count
Server Address
interface
Description
The relay configuration is applied to packets that arrive on this
interface. This field is set to "any" for global IP helper entries.
The relay configuration is applied to packets whose destination
UDP port is this port. Entries whose UDP port is identified as
"any" are applied to packets with the destination UDP ports listed
in
Table
47-1.
If "Yes", packets arriving on the given interface with the given
destination UDP port are discarded rather than relayed. Discard
entries are used to override global IP helper address entries which
otherwise might apply to a packet.
The number of times the IP helper entry has been used to relay or
discard a packet.
The IPv4 address of the server to which packets are relayed.
]
IP Helper/DHCP Relay Commands
1041

Advertisement

Table of Contents
loading

Table of Contents