Ip Default-Gateway - Dell Networking 2024 Reference Manual

ip default-gateway

Use the ip default-gateway command in Global Configuration mode to
configure a default gateway (router).
Syntax
ip-address
ip default-gateway
ip-address
no ip default-gateway
ip-address —Valid IPv4 address of an attached router.
•
Default Configuration
No default gateway is defined.
Command Mode
Global Configuration mode
User Guidelines
When the system does not have a more specific route to a packet's
destination, it sends the packet to the default gateway. The system installs a
default IPv4 route with the gateway address as the next hop address. The
route preference is 253. A default gateway configured with this command is
more preferred than a default gateway learned from a DHCP server, which has
a route preference of 254. It is less preferred than a static route configured via
the ip route command, which has a route preference of 1. Use the show ip
route command to display the active default gateway.
Only one default gateway can be configured. If you invoke this command
multiple times, each command replaces the previous value.
Example
The following example sets the default-gateway to 10.1.1.1.
console(config)#ip default-gateway 10.1.1.1.
483
IP Addressing Commands