Dell Networking 2024 Reference Manual page 672

console(config-policy-classmap)#police-simple 1000 64 conform-action
transmit violate-action drop
police-single-rate
Use the police-single-rate command to implement a single-rate Three Color
Market (srTCM) per RFC 2697. An srTCM meters a traffic stream and colors
packets according to three parameters: Committed Information Rate (CIR),
Committed Burst Size (CBS), and Peak Burst Size (PBS). A packet is colored
red if it exceeds the CBS and the PBS, yellow if it exceeds the CBS, and green
if it exceeds neither. An srTCM is useful in situations where only the length of
the burst, but not the peak rate, determines the service assignment.
Syntax
police-single-rate
exceed-action
datarate —Data rate in kilobits per second (Kbps). (Range 1-4294967295)
•
burstsize —Burst size in kilobits per seconds (Kbps). (Range 1-128)
•
excess-burstsize —Excess burst size in kilobits per seconds (Kbps). (Range
•
1-128)
action —The action to take according to the color. Select one:
•
– drop: Drop the packet.
– set-prec-transmit
ip-prec and transmit. (Range 0-7)
set-dscp-transmit
–
val and transmit. (Range 0-63)
– set-cos-transmit
packet to
– transmit: Transmit the packet unmodified.
Default Configuration
There no default configuration for this command.
Command Modes
Policy-Class-Map Configuration mode
672
QoS Commands
datarate burstsize excess-burstsize
action
violate-action
ip-prec : Remark the IP precedence in the packet to
dscp-val : Remark the DSCP in the packet to dscp-
802.1p-priority : Remark the 802.1p priority in the
802.1p-priority and transmit. (Range 0-7)
action
action
conform-action