Logging Traps - Dell Networking 2024 Reference Manual

– emergency (0)
– alert (1)
– critical (2)
– error (3)
– warning (4)
– notice (5)
– info (6)
– debug (7)
• none—
If you specify this keyword, no log messages are e-mailed urgently. All log
messages at or above the non-urgent level (configured with the logging email
command) are e-mailed in batch.
Default Configuration
The default severity level is alert.
Command Mode
Global Configuration mode
User Guidelines
Log messages at or above this severity level are considered urgent. By default,
Emergency and Alert log messages are considered urgent. Urgent log
messages are e-mailed immediately, one log message per e-mail message, and
do not wait for the log time to expire. Urgent log messages are not e-mailed
unless you enable e-mail alerting with the logging email command.

logging traps

Use the logging traps command in Global Configuration mode to set the
lowest severity level at which SNMP traps are logged. To revert the urgent
severity level to its default value, use the no form of this command.
Syntax
severity
logging traps
no logging traps
360
E-mail Alerting Commands