no ipv6 route
no ipv6 route
no ipv6 route
distance —The default administrative distance for static routes. (Range 1-
•
255)
ipv6-prefix —An IPv6 prefix representing the subnet that can be reached
•
via the next-hop neighbor.
prefix-length —The length of the IPv6 prefix — a decimal value (usually 0-
•
64) that shows how many of the high-order contiguous bits of the address
comprise the prefix (the network portion of the address). A slash mark
must separate the prefix from the prefix-length with no spaces on either
side of the slash mark.
interface-type —Distinguishes direct static routes from point-to-point and
•
broadcast interfaces, and must be specified when using a link-local address
as the next hop. Interface-type can be Null or vlan plus vlan-id or tunnel
plus tunnel-id.
ipv6-address —The IPv6 address of the next hop neighbor.
•
preference —The administrative distance the router uses to compare this
•
route with routes from other route sources that have the same destination.
(Range: 1-255)
Default Configuration
1 is the default value for
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configure an IPv6 static route.
console(config)#ipv6 route 2020:1::1/64 2030:1::2
1100
IPv6 Routing Commands
ipv6-prefix/prefix-length ipv6-address preference
ipv6-prefix/prefix-length interface-type ipv6-address
ipv6-prefix/prefix-length interface
preference
.