Dell Networking 2024 Reference Manual page 1115

MLD Operational
Mode
MLD Version
Query Interval
Query Max
Response Time
Robustness
Startup Query
Interval
Startup Query
Count
Last Member
Query Interval
Last Member
Query Count
The following information is displayed if the operational mode of the MLD
interface is enabled:
Field
Querier Status
Querier Address
Querier Up Time
Querier Expiry
Time
Wrong Version
Queries
The operational status of MLD on the interface.
This field indicates the version of MLD configured on the
interface.
This field indicates the configured query interval for the
interface.
This field indicates the configured maximum query response
time (in seconds) advertised in MLD queries on this interface.
This field displays the configured value for the tuning for the
expected packet loss on a subnet attached to the interface.
This value indicates the configured interval between General
Queries sent by a Querier on startup.
This value indicates the configured number of Queries sent out
on startup, separated by the Startup Query Interval.
This value indicates the configured Maximum Response Time
inserted into Group-Specific Queries sent in response to Leave
Group messages.
This value indicates the configured number of Group-Specific
Queries sent before the router assumes that there are no local
members.
Description
This value indicates whether the interface is a MLD querier or
non-querier on the subnet with which it is associated.
The IP address of the MLD querier on the subnet the interface
with which it is associated.
Time elapsed in seconds since the querier state has been
updated.
Time left in seconds before the Querier losses its title as querier.
Indicates the number of queries received whose MLD version
does not match the MLD version of the interface.
IPv6 Routing Commands
1115