Udld Enable (Interface Configuration) - Dell Networking 2024 Reference Manual

no udld timeout interval
timeout-interval —UDLD timeout interval. Range is 5 to 60 seconds.
•
Default Configuration
The default timeout interval is 5 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command sets the time interval used to determine if the link has
bidirectional or unidirectional connectivity. If no ECHO replies are received
within three times the message interval, then the link is considered to have
unidirectional connectivity.

udld enable (Interface Configuration)

Use the udld enable command in Interface (physical) Configuration mode to
enable UDLD on a specific interface.
Use the no form of the command to disable UDLD on an interface.
Syntax
udld enable
no udld enable
Default Configuration
UDLD is disabled by default on an interface.
Command Mode
Interface (physical) Configuration mode
User Guidelines
UDLD cannot be enabled on a port channel. Instead, enable UDLD on the
physical interfaces of a port channel.
786
UDLD Commands