Show Green-Mode - Dell Networking 2024 Reference Manual

Tx Low Power Idle Event Count......... 0
Tx Low Power Idle Duration (uSec)......0
Tw_sys_tx (usec)..................... 17
Tw_sys_tx Echo(usec)................. 17
Tw_sys_rx (usec)..................... 17
Tw_sys_tx Echo(usec)................. 17
Fallback Tw_sys (usec)............... 17
Remote Tw_sys_tx (usec).............. 21
Remote Tw_sys_tx Echo(usec).......... 21
Remote Tw_sys_rx (usec)............... 21
Remote Tw_sys_tx Echo(usec).......... 21
Remote fallback Tw_sys (usec)........ 21
Tx DLL enabled........................ Yes
Tx DLL ready.......................... Yes
Rx DLL enabled........................ Yes
Rx DLL ready.......................... Yes
Cumulative Energy Saving (W * H)............... 2.37
Time Since Counters Last Cleared......... 1 day 20 hr 47 min 34 sec

show green-mode

Use the show green-mode command in Privileged EXEC mode to display the
green-mode configuration for the whole system. The status is shown only for
the modes supported on the corresponding hardware platform whether
enabled or disabled.
Syntax
show green-mode
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command output provides the following information.
439
Green Ethernet Commands