Ip Igmp Snooping Querier Query-Interval - Dell Networking 2024 Reference Manual

Syntax
ip igmp snooping querier election participate
no ip igmp snooping querier election participate
Default Configuration
The snooping querier is configured to not participate in the querier election
by default. If the switch detects another querier in the VLAN, it will cease
sending queries for the querier timeout period.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the snooping querier to participate in the
querier election.
console(config)#ip igmp snooping querier election participate

ip igmp snooping querier query-interval

This command sets the IGMP Querier Query Interval time, which is the
amount of time in seconds that the switch waits before sending another
periodic query. The no form of this command sets the IGMP Querier Query
Interval time to its default value.
Syntax
ip igmp snooping querier query-interval
no ip igmp snooping querier query-interval
interval–count — Amount of time in seconds that the switch waits before
•
sending another general query. (Range: 1-1800)
Default Configuration
The query interval default is 60 seconds.
470
IGMP Snooping Querier Commands
vlan-id
vlan-id
interval-count