Vlan Association Subnet; Vlan Makestatic - Dell Networking 2024 Reference Manual

vlan association subnet

Use the vlan association subnet command in VLAN Configuration mode to
associate a VLAN to a specific IP-subnet. Only packets with a matching
source IP address are placed into the VLAN.
Syntax
vlan association subnet
no vlan association subnet
ip-address — Source IP address. (Range: Any valid IP address)
•
subnet-mask — Subnet mask. (Range: Any valid subnet mask)
•
Default Configuration
No assigned ip-subnet.
Command Mode
VLAN Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example associates the 192.168.0.xxx IP address with VLAN ID
1.
console(config)# vlan 1
console(config-vlan-1)#vlan association subnet 192.168.0.0 255.255.255.0

vlan makestatic

This command changes a dynamically created VLAN (one that is created by
GVRP registration) to a static VLAN (one that is permanently configured and
defined). The ID is a valid VLAN identification number. VLAN range is 2-
4093.
ip-address subnet-mask
ip-address subnet-mask
VLAN Commands
825