Show Ip Policy - Dell Networking 2024 Reference Manual

Vl1 Down
The following examples display all IP information and information specific to
VLAN 2.
console#show ip interface
Default Gateway....................... 0.0.0.0
L3 MAC Address................. 001E.C9AA.AC84
Routing Interfaces:
Interface State
---------- -----
Vl1 Down
console#show ip interface vlan2
Routing Interface Status......... Up
Primary IP Address.........192.168.75.1/255.255.255.0
Method........................... DHCP
Routing Mode..................... Enable
Administrative Mode.............. Enable
Forward Net Directed Broadcasts.... Disable
Proxy ARP.......................... Enable
Local Proxy ARP.................... Disable
Active State....................... Active
Link Speed Data Rate............... 100 Half
MAC address........................ 00:11:88:2A:3C:B3
Encapsulation Type................. Ethernet
IP MTU............................. 1500
Bandwidth.......................... 100000 kbps
Destination Unreachables........... Enabled
ICMP Redirects..................... Enabled
console#show ip interface out-of-band
IP Address............................. 10.131.11.66
Subnet Mask............................ 255.255.255.0
Default Gateway........................ 10.131.11.1
Configured IPv4 Protocol................. DHCP
Burned In MAC Address............... 001E.C9AA.AD1C

show ip policy

Use the show ip policy command in Privileged EXEC mode to display the
route maps used for policy based routing on the router interfaces.
0.0.0.0 0.0.0.0
IP Address IP Mask
--------------- --------------- -------
0.0.0.0 0.0.0.0
None
Method
None
IP Routing Commands
1065