Ipv6 Host; Ipv6 Hop-Limit - Dell Networking 2024 Reference Manual

ipv6 hop-limit

Use the ipv6 hop-limit command to configure the hop limit used in IPv6
PDUs originated by the router. Use the no form of the command to return
the hop limit to the default setting.
Syntax
ipv6 hop-limit
no ipv6 hop-limit
count —The number of hops before the PDU expires (Range 0-255).
•
Default Configuration
The default count is 64 hops.
Command Mode
Global Configuration

ipv6 host

The ipv6 host command is used to define static host name-to- ipv6 address
mapping in the host cache.
Syntax
name ipv6-address
ipv6 host
name
no ipv6 host
name — Host name.
•
ipv6-address — IPv6 address of the host.
•
Default Configuration
No IPv6 hosts are defined.
Command Mode
Global Configuration mode.
1086
IPv6 Routing Commands
count