show ip ospf interface stats
Use the show ip ospf interface stats command in User EXEC mode to display
the statistics for a specific interface. The information is only displayed if
OSPF is enabled.
Syntax
vlan-id
show ip ospf interface stats vlan
vlan-id — Valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the ospf statistics for VLAN 15.
console>show ip ospf interface stats vlan 15
OSPF Area ID....................................... 0.0.0.0
Area Border Router Count................................. 0
AS Border Router Count................................... 0
Area LSA Count........................................... 1
IP Address......................................... 2.2.2.2
OSPF Interface Events.................................... 1
Virtual Events........................................... 0
Neighbor Events.......................................... 0
External LSA Count....................................... 0
show ip ospf neighbor
Use the show ip ospf neighbor command in Privileged EXEC mode to display
information about OSPF neighbors. The information below only displays if
OSPF is enabled and the interface has a neighbor.
1262
OSPF Commands