Dell Networking 2024 Reference Manual page 516

Syntax
show ipv6 mld snooping [interface {{gigabitethernet unit/slot/port| port-
port-channel-number | tengigabitethernet unit/slot/port |
channel
fortygigabitethernet unit/slot/port}} | vlan
Default Configuration
This command has no default configuration
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
With no optional arguments, the command displays the following
information:
• Admin Mode — Indicates whether or not MLD Snooping is active on the
switch.
• Multicast Control Frame Count— Displays the total number of IGMP or
PIM packets which have been received (same as IPv4).
• Flooding Unregistered to All Ports—Indicates if Flooding Unregistered to
All Ports is enabled. If enabled, multicast data traffic for which no listeners
have registered is flooded to all ports in a VLAN instead of only flooded to
multicast router ports.
• SSM FDB Capacity—The capacity of the SSM FDB.
• SSM FDB Current Entries—The current count of SSM FDB entries.
• SSM FDB High Water Mark—The highest count of FDB entries since the
last clear counters all.
When you specify an interface or VLAN, the following information displays:
• MLD Snooping Admin Mode — Indicates whether MLD Snooping is
active on the interface or VLAN.
• Fast Leave Mode — Indicates whether MLD Snooping Fast-leave is active
on the VLAN.
516
IPv6 MLD Snooping Commands
vlan-id
}]