Vlan Protocol Group - Dell Networking 2024 Reference Manual

Syntax
vlan makestatic
vlan-id — Valid vlan ID. Range is 2–4093.
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration Mode
User Guidelines
The dynamic VLAN (created via GRVP) should exist prior to executing this
command. See the Type column in output from the
determine that the VLAN is dynamic.
Example
The following changes vlan 3 to a static VLAN.
console(config-vlan)#vlan makestatic 3

vlan protocol group

Use the vlan protocol group command in Global Configuration mode to add
protocol-based groups to the system. When a protocol group is created, it is
assigned a unique group ID number. The group ID is used to identify the
group in subsequent commands. Use the no form of the command to remove
the specified VLAN protocol group name from the system.
Syntax
vlan protocol group
no vlan protocol group
groupid — The protocol-based VLAN group ID, to create a protocol-based
•
VLAN group. To see the created protocol groups, use the show port
protocol all command.
826
VLAN Commands
vlan-id
groupid
groupid
show vlan command to