Dell Networking 2024 Reference Manual page 938

Syntax
name
client-name
no client-name
name —The name of the DHCP client. The client name is specified as up
•
to 31 printable characters.
Default Configuration
There is no default client name.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool
parameters. The client name should not include the domain name as it is
specified separately by the
is not recommended to use embedded blanks in client names.
Example
console(config-dhcp-pool)#client-identifier 01:03:13:18:22:33:11
console(config-dhcp-pool)#host 192.168.21.34 32
console(config-dhcp-pool)#client-name Line_Printer_Hallway
default-router
Use the default-router command in DHCP Pool Configuration mode to set
the IPv4 address of one or more routers for the DHCP client to use. Use the
no form of the command to remove the default router configuration. Use the
show ip dhcp pool
Syntax
default-router {
no default-router
ip-address1 —The IPv4 address of the first default router for the DHCP
•
client.
938
DHCP Server and Relay Agent Commands
command to display pool configuration
domain-name (IP DHCP Pool Config)
command to display pool configuration parameters.
ip-address1 ip address2
}[ ]
command. It