Show Ipv6 Pim Neighbor - Dell Networking 2024 Reference Manual

Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pim interface vlan 6
Slot/Port...................................... vlan 6
IP Address..................................... FE80::2FF:EDFF:FED0:2/128
Hello Interval (secs).......................... 30
Join Prune Interval (secs)..................... 60
Neighbor Count ................................ 0
Designated Router.............................. FE80::2FF:EDFF:FED0:2
DR Priority.................................... 1
BSR Border..................................... Disabled

show ipv6 pim neighbor

Use the show ipv6 pim neighbor command to display IPv6 PIMSM neighbors
learned on the routing interfaces.
Syntax
vlan-id
show ipv6 pim neighbor [interface vlan ]
vlan-id —A valid VLAN ID value.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
If a VLAN interface is not specified, all neighbors are shown.
Example
console#show ipv6 pim neighbor
1185
IPv6 Multicast Commands