Show Dhcp L2Relay All; Show Dhcp L2Relay Interface - Dell Networking 2024 Reference Manual

show dhcp l2relay all

Use the show dhcp l2relay all command in Privileged EXEC mode to display
the summary of DHCP L2 Relay configuration.
Syntax
show dhcp l2relay all
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console #show dhcp l2relay all
DHCP L2 Relay is Enabled.
Interface L2RelayMode
---------- -----------
Gi1/0/2 Enabled
Gi1/0/4 Disabled
VLAN Id L2 Relay
--------- ----------
3 Disabled
5 Enabled
6 Enabled
7 Enabled
8 Enabled
9 Enabled
10 Enabled

show dhcp l2relay interface

Use the show dhcp l2relay interface command in Privileged EXEC mode to
display DHCP L2 Relay configuration specific to interfaces.
316
DHCP Layer 2 Relay Commands
TrustMode
--------------
untrusted
trusted
CircuitId RemoteId
----------- ------------
Enabled --NULL--
Enabled --NULL--
Enabled broadcom
Disabled --NULL--
Disabled --NULL--
Disabled --NULL--
Disabled --NULL--