show ipv6 dhcp snooping interfaces
Use the show ipv6 dhcp snooping interfaces command to show the DHCP
Snooping status of IPv6 interfaces.
Syntax
show ipv6 dhcp snooping interfaces [
interface id —A valid physical interface.
•
Default Configuration
There is no default configuration for this command.
Command Modes
User EXEC, Privileged EXEC (all show modes)
User Guidelines
If no parameter is given, all interfaces are shown.
Example
(console) #show ipv6 dhcp interfaces
Interface
Trust State
---------- ------------- ------------- ---------------
Gi1/0/1
Gi1/0/2
Gi1/0/3
show ipv6 dhcp snooping statistics
Use the show ipv6 dhcp snooping statistics command to display IPv6 dhcp
snooping filtration statistics.
Syntax
show ipv6 dhcp snooping statistics
interface id
Rate Limit
(pps)
No
15
No
15
No
15
]
Burst Interval
(seconds)
1
1
1
DHCPv6 Snooping Commands
989