private-vlan
Use the private-vlan command in VLAN Configuration mode to define a
private VLAN association between the primary and secondary VLANs.
Use the no form of the command to remove the private VLAN association.
Syntax
private-vlan {primary|isolated|community|association [add|remove]
list
}
no private-vlan [association]
association—Defines an association between the primary VLAN and
•
secondary VLANs.
•
primary—Specify that the selected VLAN is the primary VLAN.
•
community—Specify that the selected VLAN is the community VLAN.
•
isolated—Specify that the selected VLAN is the isolated VLAN.
•
add—Associates a secondary VLAN with the primary VLAN.
•
remove—Deletes the secondary VLAN association with the primary
VLAN.
vlan-list —A list of secondary VLAN ids to be mapped to a primary VLAN.
•
The VLAN list can contain multiple entries separated by commas and
containing no spaces. Each entry can be a single VLAN id or a hyphenated
range of VLANs.
Default Configuration
This command has no default setting.
Command Mode
VLAN Configuration mode
User Guidelines
A community VLAN carries traffic among community ports and from
community ports to the promiscuous ports on the corresponding primary
VLAN.
832
VLAN Commands
vlan-