Show Dot1X Interface - Dell Networking 2024 Reference Manual

User Name...................................... 000102030405
Supp MAC Address............................... 00:01:02:03:04:05
Session Time................................... 518
Filter Id......................................
VLAN Id........................................ 1
VLAN Assigned.................................. Default
Session Timeout................................ 0
Session Termination Action..................... Default
Logical Interface.............................. 96
Interface...................................... gi1/0/7
User Name...................................... brcm
Supp MAC Address............................... 00:08:A1:7E:45:1A
Session Time................................... 67
VLAN Id........................................ 1
VLAN Assigned.................................. Monitor Mode
Session Timeout................................ 0
Session Termination Action..................... Default

show dot1x interface

This command shows the status of MAC Authentication Bypass. This feature
is an extension of Dot1x Option 81 feature added in Dell Networking Release
2.1. to accept a VLAN name as an alternative to a number when RADIUS
indicates the Tunnel-Private-Group-ID for a supplicant.
Syntax
show dot1x interface {gigabitethernet unit/slot/port| tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port}
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
870
802.1x Commands