Ethernet Cfm Mep Level - Dell Networking 2024 Reference Manual

Syntax
ethernet cfm cc level
vlanid —VLAN ID representing a service instance that is monitored by this
•
maintenance association. The range is 1-4093.
• secs—Time interval between successive transmissions. The range is 1, 10,
60, and 600 seconds. The default is 1 second.
Default Configuration
CCMs are not sent by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#ethernet cfm cc level 1 vlan 15 interval 10

ethernet cfm mep level

Use the ethernet cfm mep level command in Interface Configuration mode
to create a Maintenance End Point (MEP) on an interface at the specified
level and direction. MEPs are configured per Maintenance Association per
Maintenance Domain. Use the no form of the command to delete a MEP.
Syntax
ethernet cfm mep level
• level—Maintenance association level
• direction—
indicates the MEP is facing towards the LAN.
• mpid—
Maintenance entity identifier
• vlan—
VLAN on which the MEP operates.
418
Ethernet CFM Commands
0-7 vlan-list
vlan
0-7
direction
Up indicates the MEP is facing towards Bridge Relay Entity. Down
secs
interval
up|down 1-8191
mpid
1-4093
vlan