<cr> Press enter to execute the command.
configuration Restore OSPF configuration to defaults
counters Clear OSPF counters
neighbor Bounce all OSPF neighbors
redistribution Flush and reoriginate external LSAs
clear ip ospf stub-router
Use the clear ip ospf stub-router command in Privileged EXEC mode to force
OSPF to exit stub router mode when it has automatically entered stub router
mode because of a resource limitation.
Syntax
clear ip ospf stub-router
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
OSPF only exits stub router mode if it entered stub router mode because of a
resource limitation or if it is in stub router mode at startup. This command
has not effect is OSPF is configured to be in stub router mode permanently.
compatible rfc1583
Use the compatible rfc1583 command in Router OSPF Configuration mode
to enable OSPF 1583 compatibility. Use the no form of the command to
disable it.
Syntax
compatible rfc1583
no compatible rfc1583
1217
OSPF Commands