Command Mode
User EXEC, Privileged EXEC mode, Configuration mode and all
Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40
Interface
Trusted
---------
--------
1/0/1
Yes
1/0/2
No
1/0/3
No
1/0/4
No
1/0/6
No
show ip dhcp snooping binding
Use the show ip dhcp snooping binding command to display the DHCP
snooping binding entries.
Syntax
show ip dhcp snooping binding [{static | dynamic}] [interface
port-channel-id
port-channel
•
static | dynamic— Use these keywords to filter by static or dynamic
bindings.
interface-id —The interface for which to show bindings.
•
vlan-id — The number of the VLAN for which to show bindings.
•
Default Configuration
There is no default configuration for this command.
Log Invalid Pkts
----------------
No
Yes
Yes
No
No
vlan-id
] [vlan
]
DHCP Snooping Commands
interface-id
|
339