Dell Networking 2024 Reference Manual page 622

Peer link BPDU's Tx error.............................. 9
Peer link BPDU's received from peer.................... 143
Peer link BPDU's Rx error.............................. 1
Peer link LACPDU's tranmsitted to peer................. 123
Peer link LACPDU's Tx error............................ 9
Peer link LACPDU's received from peer.................. 143
Peer link LACPDU's Rx error............................ 1
(console) #show vpc statistics peer-link
Peer link control messages transmitted......... 24
Peer link control messages Tx errors........... 0
Peer link control messages Tx timeout.......... 0
Peer link control messages ACK transmitted..... 23
Peer link control messages ACK Tx errors....... 0
Peer link control messages received............ 23
Peer link data messages transmitted............ 73
Peer link data messages Tx errors.............. 0
Peer link data messages Tx timeout............. 0
Peer link data messages received............... 73
Peer link BPDU's transmitted to peer........... 0
Peer link BPDU's Tx errors..................... 0
Peer link BPDU's received from peer............ 0
Peer link BPDU's Rx errors..................... 0
Peer link LACPDU's tranmsitted to peer......... 73
Peer link LACPDU's Tx errors................... 0
Peer link LACPDU's received from peer.......... 73
Peer link LACPDU's Rx errors................... 0
vpc
Use the vpc command to configure a port-channel (LAG) as part of an
MLAG instance. Upon issuing this command, the port-channel is down until
the port-channel member information is exchanged and agreed between the
MLAG peer switches.
Use the no form of the command to remove the LAG from the MLAG
domain.
Syntax
vpc-id
vpc
vpc-id
no vpc
• vpd-id—The MLAG identifier.
622
MLAG