Dell Networking 2024 Reference Manual page 1200

area nssa no-summary
Use the area nssa no-summary command in Router OSPF Configuration
mode to configure the NSSA so that summary LSAs are not advertised into
the NSSA.
Syntax
area-id
area nssa no-summary
area-id
no area
area-id — Identifies the OSPF NSSA to configure. (Range: 0–4294967295)
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the NSSA so that summary LSAs are not
advertised into the NSSA.
console(config-router)#area 20 nssa no-summary
area nssa translator-role
Use the area nssa translator-role command in Router OSPF Configuration
mode to configure the translator role of the NSSA.
Syntax
area-id
area nssa translator-role {always | candidate}
area-id
no area
area-id — Identifies the OSPF NSSA to configure. (Range: IP address or
•
decimal from 0–4294967295)
1200
OSPF Commands
nssa no-summary
nssa translator-role