Dell Networking 2024 Reference Manual page 946

User Guidelines
This command has no user guidelines.
Example
console(config-dhcp-pool)#lease 1 12 59
netbios-name-server
Use the netbios-name-server command in DHCP Pool Configuration mode
to configure the IPv4 address of the Windows Internet Naming Service
(WINS) for a Microsoft DHCP client. Use the no form of the command to
remove the NetBIOS name server configuration.
Syntax
ip-address ip-address2...ip-address8
netbios-name-server [ ]
no netbios-name-server
ip-address —IPv4 address
•
Default Configuration
There is no default name server configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool command to display pool configuration
parameters. Up to eight name server addresses may be specified. The
NetBIOS WINS information is conveyed in the Option 44 TLV of the DHCP
OFFER, DCHP ACK, DHCP INFORM ACK and DHCP BOOTREPLY
messages.
Example
console(config-dhcp-pool)#netbios-name-server 192.168.21.1 192.168.22.1
946
DHCP Server and Relay Agent Commands