Syntax
show ipv6 pim rp mapping [
rp-address — IP address of RP.
•
•
candidate—Show candidate rendezvous point mappings.
•
static—Show static rendezvous point mappings.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pim rp mapping
Group Address.................................. FF1E::/64
RP Address..................................... 2001::1
origin......................................... Static
Group Address.................................. FF1E::/64
RP Address..................................... 3001::1
origin......................................... BSR
rp-address
candidate
|
IPv6 Multicast Commands
static
|
]
1187