Dell Networking 2024 Reference Manual page 653

diffserv
Use the diffserv command in Global Configuration mode to set the DiffServ
operational mode to active. While disabled, the DiffServ configuration is
retained and can be changed, but it is not activated. When enabled, DiffServ
services are activated. To set the DiffServ operational mode to inactive, use
the no form of this command.
Syntax
diffserv
no diffserv
Default Configuration
This command default is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to set the DiffServ operational mode to
active.
console(Config)#diffserv
drop
Use the drop command in Policy-Class-Map Configuration mode to specify
that all packets for the associated traffic stream are to be dropped at ingress.
Syntax
drop
Default Configuration
This command has no default configuration.
653
QoS Commands