Show Ipv6 Mroute Source - Dell Networking 2024 Reference Manual

console#show ipv6 mroute group FF43::5
Source IP Group IP
--------------- --------------- -------- ----------- --------------- -----
* FF43::5
2001::5 FF43::5
console#show ipv6 mroute group FF43::5 summary
Source IP Group IP
--------------- --------------- -------- --------- --------- ------
* FF43::5
2001::5 FF43::5

show ipv6 mroute source

Use the show ipv6 mroute source command in Privileged EXEC mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
sourceipaddr sourceipaddr
or
Syntax
show ipv6 mroute source
sourceipaddr — IP address of source.
•
groupipaddr — IP address of multicast group.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
Multicast Route Table
Expiry
(mm:ss)
00:00
02:54
Multicast Route Table Summary
Protocol IIF
PIMSM
PIMSM
groupipaddr
|
sourceipaddr
Up Time
(hh:mm:ss) RPF Neighbor
00:01:00 ::
00:00:35 2001::5
OIF
Vl11
Vl13
Vl12 Vl11
Vl13
pair value(s).
groupipaddr
{summary |
IPv6 Multicast Commands
Flags
RPT
SPT
Expiry
}
1183