Renew Dhcp - Dell Networking 2024 Reference Manual

renew dhcp

Use the renew dhcp command in Privileged EXEC mode to force the DHCP
client to immediately renew an IPv4 address lease.
Syntax
interface-id
renew dhcp {
interface-id
•
Conventions
• out-of-band—Keyword to identify the out-of-band interface. The DHCP
client renews the leased address on this interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
If the interface has a leased IPv4 address when this command is issued, the
DHCP client sends a DHCP REQUEST message telling the DHCP server
that it wants to continue using the IP address. If DHCP is enabled on the
interface, but the interface does not currently have an IPv4 address (for
example, if the address was previously released), then the DHCP client sends
a DISCOVER to acquire a new address. If DHCP is not enabled on the
interface, then the command fails and displays the following error message:
DHCP is not enabled on this interface
Examples
The first example is for routing interfaces.
console#renew dhcp vlan 2
The second example is for an out-of-band port.
console#renew dhcp out-of-band
| out-of-band}
—Any valid routing interface. See
for interface representation.
DHCP Management Interface Commands
Interface Naming
325