Clear Lldp Remote-Data - Dell Networking 2024 Reference Manual

The receive function accepts incoming LLDPDU frames and stores
information about the remote stations. Both local and remote data may be
displayed by the user interface and retrieved using SNMP as defined in the
LLDP MIB definitions. The component maintains one remote entry per
physical network connection.
The LLDP component manages a number of statistical parameters
representing the operation of each transmit and receive function on a per-port
basis. These statistics may be displayed by the user interface and retrieved
using SNMP as defined in the MIB definitions.
Commands in this Chapter
This chapter explains the following commands:

clear lldp remote-data

clear lldp statistics
lldp med
lldp med confignotification lldp transmit-mgmt
lldp med
faststartrepeatcount
lldp med transmit-tlv
lldp notification
lldp notification-interval
clear lldp remote-data
Use the clear lldp remote-data command in Privileged EXEC mode to delete
all LLDP information from the remote data table.
Syntax
clear lldp remote-data
552
LLDP Commands
lldp receive
lldp timers
lldp transmit
lldp transmit-tlv
show lldp
show lldp interface
show lldp local-device
show lldp med
show lldp med interface
show lldp med local-device
detail
show lldp med remote-
device
show lldp remote-device
show lldp statistics
–
–