Dell Networking 2024 Reference Manual page 373

Syntax
clear counters [{gigabitethernet unit/slot/port | port-channel
number | switchport | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use of the clear counters command with no parameters indicates that both
switch and all interface statistics are to be cleared. This command clears the
individual component counters. If port-channel is specified, the command
clears the port channel counters, including the flap counters.
Example
In the following example, the counters for port 1/0/1 are cleared.
console#clear counters gigabitethernet 1/0/1
description
Use the description command in Interface Configuration mode to add a
description to an interface. To remove the description use the no form of this
command.
Syntax
string
description
no description
string — Comment or a description of the port attached to this interface.
•
(Range: 1 to 64 characters)
Default Configuration
By default, the interface does not have a description.
Ethernet Configuration Commands
port-channel-
373