Show Classofservice Trust - Dell Networking 2024 Reference Manual

55
56(cs7)
57
58
59
60
61
62
63
console#

show classofservice trust

Use the show classofservice trust command in Privileged EXEC mode to
display the current trust mode setting for a specific interface.
Syntax
show classofservice trust [{gigabitethernet unit/slot/port| port-channel
channel-number | tengigabitethernet unit/slot/port | fortygigabitethernet
unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
If the interface is specified, the port trust mode of the interface is displayed.
If omitted, the port trust mode for global configuration is shown.
Example
The following example displays the current trust mode settings for the
specified port.
console#show classofservice trust 1/0/2
Class of Service Trust Mode: Dot1P
3
3
3
3
3
3
3
3
3
QoS Commands
port-
685