Aaa Accounting Dot1X Default Start-Stop - Dell Networking 2024 Reference Manual

aaa accounting dot1x default start-stop

The aaa accounting network default start-stop group radius command has
been migrated to the aaa accounting dot1x default start-stop {radius|none}
command. Use the aaa accounting dot1x default start-stop command in
Global Configuration mode to create an accounting method list.
Use the no form of the command to delete a list. A list may be identified by
the default keyword or a user-specified listname.
Use either the aaa accounting dot1x default none or no aaa accounting
dot1x default command to disable dot1x accounting.
Syntax
aaa accounting dot1x default start-stop {radius|none }
no aaa accounting dot1x default
aaa accounting dot1x default none
aaa accounting {exec|commands} {
stop|stop-only} {radius|tacacs|radius tacacs|tacacs radius}
no aaa accounting {exec|commands} {default|list}
• commands—Perform accounting on all user executed commands
(TACACS only).
exec—Perform accounting on EXEC terminal sessions.
•
listname —The name of an Accounting Method List. The list name can
•
consist of any printable character. Use quotes around the list name if
embedded blanks are contained in the list name.
• none—Disable issuing accounting notices for the specified list.
Default Configuration
IEEE 802.1x accounting is not enabled by default.
Command Mode
Global Configuration mode
listname
|default} {none|start-
RADIUS Commands
701