Debug Cfm - Dell Networking 2024 Reference Manual

Example
show Ethernet cfm statistics [domain <domain-name> | level <0-7>]
Console# show ethernet cfm statistics
------------------------------------------------------------------
Statistics for 'Domain: domain1, Level: 1, Vlan: 11, MEP Id: 1'
------------------------------------------------------------------
Out-of-sequence CCM's received
CCM's transmitted
In-order Loopback Replies received
Out-of-order Loopback Replies received: 0
Bad MSDU Loopback Replies received
Loopback Replies transmitted
Unexpected LTR's received
------------------------------------------------------------------
Statistics for 'Domain: domain1, Level: 1, Vlan: 11, MEP Id: 2'
------------------------------------------------------------------
Out-of-sequence CCM's received
CCM's transmitted
In-order Loopback Replies received
Out-of-order Loopback Replies received: 5
Bad MSDU Loopback Replies received
Loopback Replies transmitted
Unexpected LTR's received
------------------------------------------------------------------
Statistics for 'Domain: domain1, Level: 1, Vlan: 11, MEP Id: 3'
------------------------------------------------------------------
Out-of-sequence CCM's received
CCM's transmitted
In-order Loopback Replies received
Out-of-order Loopback Replies received: 0
Bad MSDU Loopback Replies received
Loopback Replies transmitted
Unexpected LTR's received

debug cfm

Use the debug cfm command in Privileged EXEC mode to enable CFM
debugging. Use the no form of the command to disable debugging.
Syntax
debug cfm {event | {pdu {all | ccm | ltm | lbm |} {tx | rx}}}
428
Ethernet CFM Commands
: 0
: 259
: 5
: 0
: 5
: 0
: 0
: 1
: 5
: 0
: 0
: 0
: 0
: 1
: 0
: 0
: 5
: 0