Parameter Copy And Verify Function; Parameter For Copying And Verifying Set Values - Omron SYSDRIVE 3G3MV User Manual

Preparing for Operation and Monitoring

3-2 Parameter Copy and Verify Function

The Digital Operator of the 3G3MV Inverter has an EEPROM in which the
set values in all the parameters and data on the capacity and software ver-
sion of the Inverter can be stored.
By using the EEPROM, most parameter set values in the Inverter can be
copied to another Inverter.
Note In the above case, however, the Inverters must have the same power supply
specification and control mode (i.e., V/f or vector control mode). Some types of
parameter set values cannot be copied.

3-2-1 Parameter for Copying and Verifying Set Values

·Use the following parameter to read, copy, and verify the set values.
Parame- Register
ter
n176 01B0
Note No value can be copied or written while the Inverter is in operation.
3-10
Name Description
Parame- The following items are
ter copy selectable.
and
rdy: Ready to accept the
verify
next command
function
rEd: Reads the parameter
selection
CPy: Copies the parameter
vFy: Verifies the parameter
vA: Displays the capacity of
the Inverter
Sno: Displays the software
version.
Setting Unit of
range setting
rdy to --- rdy
Sno
Chapter 3
Default Chan-
setting ges dur-
ing
opera-
tion
OK