Omron SYSDRIVE 3G3MV User Manual page 317

List of Parameters
Param- Regis- Name
eter ter No.
No.
n024 0118 Frequency
reference 1
n025 0119 Frequency
reference 2
n026 011A Frequency
reference 3
n027 011B Frequency
reference 4
n028 011C Frequency
reference 5
n029 011D Frequency
reference 6
n030 011E Frequency
reference 7
n031 011F Frequency
reference 8
n032 0120 Inching fre-
quency com-
mand
n033 0121 Upper fre-
quency refer-
ence limit
n034 0122 Lower fre-
quency refer-
ence limit
Description
Used to set internal frequency refer-
ences. ences.
Note Frequency reference
enabled in remote mode with enabled in remote mode with
n004 for frequency reference n004 for frequency reference
selection set to 1. selection set to 1.
Note These frequency references
are selected with multi-step are selected with multi-step
speed references (multi-func-
tion input). See the reference tion input). See the reference
pages pages for for the the
between multi-step speed ref- between multi-step speed ref-
erences and frequency refer- erences and frequency refer-
ences. ences.
Used to set the inching frequency
command.
Note The inching frequency com-
mand is selected with the inch-
ing command (multi-function
input). The inching frequency
command takes precedence
over the multi-step speed refer-
ence.
Used to set the upper and lower fre-
quency reference limits in percentage
based on the maximum frequency as
100%.
Note If n034 is set to a value less than Note If n034 is set to a value less than
the minimum output frequency the minimum output frequency
(n14), the Inverter will have no
output when a frequency refer-
ence less than the minimum
output frequency input is input.
Set- Unit
ting of
range set-
ting
0.0 to 0.01
max. Hz
fre- fre- (chan (chan
1 is
quency ge in
n035) n035)
relationship relationship
0 to 1%
110
0 to 1%
110
Chapter 10
Changes Ref-
Default
setting
during er-
opera- ence
tion page
6.00 Yes 5-20
0.00 Yes 5-20
0.00 Yes 5-20
0.00 Yes 5-20
0.00 Yes 5-20
0.00 Yes 5-20
0.00 Yes 5-20
0.00 Yes 5-20
6.00 Yes 5-23
100 No 5-13
0 No 5-13
10-7