Omron SYSDRIVE 3G3MV User Manual page 21

Overview
Appearance
Note For safety reasons, the reset will not work while a RUN command (forward or reverse) is in effect.
Wait until the RUN command is OFF before resetting the Inverter.
Name
PRGM indicator
Mode Key
Increment Key
Decrement Key
Enter Key
RUN Key
STOP/RESET Key
The parameters in n001 through n179 can be set
or monitored while this indicator is lit.
Note While the Inverter is in operation, the
parameters can be only monitored and only
some parameters can be changed. Any
RUN command input is ignored while this
indicator is lit. Unless n001 is 5.
Switches the simplified-LED (setting and
monitor) item indicators in sequence.
Parameter being set will be canceled if this key is
pressed before entering the setting.
Increases multi-function monitor numbers,
parameter numbers, and parameter set values.
Decreases multi-function monitor numbers,
parameter numbers, and parameter set values.
Enters multi-function monitor numbers,
parameter numbers, and internal data values
after they are set or changed.
Starts the Inverter running when the 3G3MV is in
operation with the Digital Operator.
Stops the Inverter unless parameter n007 is set
to disable the STOP Key. Functions as a Reset
Key when an inverter error occurs (see note).
Chapter 1
Function
1-7